Are You Concerned About Emissions that Impact Our Environment?
Are You Tired Of Emptying Your Wallet At The Gas Pump?
What is Cerma STM-3?
Cerma STM-3 is a revolutionary technology, which is added to the engine oil. Once added, the vehicle will restore engine performance, increase horsepower and torque, prolong operational life, and continuously clean vehicle.
Cerma has spent over 10 years validating every aspect of our treatment and the advanced science associated with Cerma STM-3. The application is simple, Cerma works with our 100% active ingredient, STM-3®, applying a long-lasting Nano Silicon Carbide (SiC) matrix seal within the sub-surfaces of the engine. While you drive, Cerma penetrates the metal surfaces 1 to 6 microns deep and forms this Silicon Carbide (SiC) matrix within the metal, that is lapped to a perfect mating surface on the metal as Cerma is curing within the sub-surfaces of the metal of the running assembly, engine, transmission or anything that requires lubrication.
Cerma STM-3 is applicable to all vehicles including cars, trucks, vans, semi-trucks, RVs, boats, industrial and commercial equipment.
Straight from the start you will see, hear and feel the difference using Cerma STM-3. By the time the "Cerma" process is complete, your engine will be at its peak performance, have that extra horsepower, run quieter and smoother, benefit from longer oil life and protection, increased fuel economy and protect the environment with emissions reduced !
Best of all, Cerma STM-3 is self-cleaning: meaning that after Cerma STM-3 is added, the engine will continuously clean itself, thus maintaining peak operational performance.
How Cerma STM-3 Works
Clean, Restore, Protect and Lubricate
Cerma STM-3 takes a 4-prong approach to increasing engine performance and enhancing vehicle. Performance in any engine is dependent on the effectiveness of the lubrication. The better the lubrication works, the better an engine can perform to its maximum potential. The areas in which Cerma STM-3 increases engine lubrication are:
1. CLEAN: Removes "DIRT" inside the engine
2. RESTORE: Restore engine to peak performance
3. PROTECT: Worlds only SELF-CLEANING engine catalyst
4. LUBRICATE: Increases the LUBRICATION of the entire engine
Clean: Cerma STM-3 removes carbon deposits, lacquer build up and dirt accumulation, which occurs when oil circulating throughout the engine forms a thin, insulating layer on the walls of the engine, thereby reducing engine efficiency and performance. Dirt accumulation is caused by too much engine oil getting in the combustion chamber, usually from inefficient valve stem seals, valve guides, or piston rings. Cerma STM-3 works as an emulsification agent, cleaning the walls inside the engine of all the accumulated carbon and lacquer, and pooling it into the engine oil when the next oil change will remove them.
Restore: Cerma STM-3 will restore the engine to peak operational performance by reconditioning worn seals, and re-seating the piston rings. Cerma STM-3 will also increase the oil pressure and reduce blow-by and oil consumption that have deteriorated over the life of the engine.
Protect: The proprietary Cerma STM-3 formulation is made up of nano molecules forming a thin micron coating inside of the entire engine. This coating continuously moves the motor oil through the system and constantly cleans the oil by not allowing carbon, lacquer or dirt to adhere to the engine walls. This produces a self-cleaning system without dirt, running at maximum performance with maximum lubrication efficiency.
Lubricate: Proper lubrication is continuously necessary for the engine to run at peak performance. Oil does not stay in any part of the engine, it continues to flow through the entire system. Cerma STM-3 delivers greater lubricity to the engine by allowing the oil to flow freely throughout the entire system. In addition, Cerma STM-3 increased lubricity allows the motor to run cooler thereby increases the life of the engine, lower maintenance costs, and extend the life of the engine.
By reducing friction and heat, Cerma's Advanced Technology provides similar benefits as traditional lubricants but works in a completely different way. Cerma STM-3 Engine Treatment does not modify the oil in any way. Instead, it modifies the surface structure of the metal to make it act like a ceramic surface. Cerma will create a Silicon Carbide matrix within the metal surface (known for it's strength, durability, smoothness and high heat resistance properties). Silicon Carbide coatings have been used for decades in racing, industry, aviation and nuclear propulsion. With STM-3®, a ceramic (SiC)-metal coating can now be applied to your engine, transmission, rear axle or whatever equipment your treating with one simple application, no special tools & without dis-assembly. Cerma with STM-3® provides a huge cost savings, with all the benefits of a ceramic engine. Seal the Steel™ with Cerma STM-3® and enjoy the performance that professional race engine builders, aerospace engineers have known about for years, but at a fraction of the prior cost to achieve same results.
Cerma STM-3® "Ceramic" Silicon Carbide (SiC) Metal Treatment is the best way to optimize your Engine or Transmission's overall performance without dis-assembly. Once you treat your engine or transmission with Cerma, you will feel and hear the difference immediately! Your vehicle will run quieter and more smoothly with improved performance. We are so certain that you will be impressed by the results, that all Cerma Treatments come with a 90-day, no hassle money back guarantee! Did I mention that Cerma is a "one" time treatment?"
Sorry, there are no products matching your search